Who installs the Wall Connector if Tesla does not?
A licensed electrician you hire does the installation. The electrician evaluates your panel, installs the breaker, runs the wire, mounts the Wall Connector and arranges the permit and inspection with the city or county. You choose who does the work and who pulls the permit.
Tesla may provide a list of installers or referral tools, but you still choose who does the work. Make sure whoever you hire holds an Arizona electrical contractor license and quotes the permit. Make sure the written quote shows the license number, the scope and the permit, since each is a sign of a careful contractor.Ask us to explain. Tesla also provides charger options and guidance through its own channels, so ask what is current when you order your equipment.
You can also hire a local electrician directly, which gives you a single point of contact for the circuit, the mounting and the inspection. Look for a contractor who explains the process in plain language, because clear communication before the job usually carries through it. Ask to see the license number and the quote before you agree, and do not hesitate to compare it with another bid from a licensed contractor.
What does a Tesla vehicle use for home charging?
A Tesla can charge from a standard outlet with a portable connector, from a 14-50 outlet at higher speed, or from a hardwired Wall Connector. The faster options need a 240 volt circuit installed by a licensed electrician. Each option has a different speed.
What ships with the car can change over time, so check what came with yours. If you have a Mobile Connector, a 14-50 outlet lets it charge much faster than a regular outlet. A contractor who asks about your panel and vehicle is doing the homework a good installation needs before the work begins.Ask us about it. Ask the electrician which connectors and adapters your car supports, so the charger you pick fits the car you drive today.
A hardwired Wall Connector is a separate purchase, and it is outdoor rated and adjustable up to 48 amps on a 60 amp breaker. Be wary of pressure to decide immediately, because a thoughtful quote does not expire in an hour and does not need a rush. Ask the electrician to explain each cost on the quote, such as the breaker, wire, mounting and the permit, so you know what you are paying for.
Do I buy the charger first or hire the electrician first?
It helps to talk to the electrician first. They check your panel and recommend the amperage and type of charger that fits, so you do not buy hardware that conflicts with what your panel and wiring can support. Ask before you buy anything.
Some owners already own the charger, and that is fine. We install what you bought, as long as the circuit is sized correctly for it and the unit is suitable for the location. Ask which cities the contractor serves, since familiarity with a city's inspection process can make the permit step go smoothly.Ask us early. Share the model name, if you already have one, so the electrician can size the breaker and plan the mounting before arrival.
Have the model number handy when you call. It lets the electrician check the amperage and mounting requirements before the site visit. Ask about the finish work too, such as patching holes and sealing conduit entries, so the garage looks clean afterward. Ask about the finish work, such as patching and painting any wall that is opened, so that the garage looks clean after the job is done.
How do I get a Tesla charger installed in the Phoenix area?
Call a licensed electrician for a site review and written quote, then schedule the permit and installation. Vortech serves Glendale, Peoria, Sun City, Sun City West and Surprise. Call (623) 321-4177 to start. We put the quote in writing. Ask any questions first.
The first visit covers panel capacity, the wire route and the best mounting spot. The quote then lists every step, including the permit and the final inspection. If you have a homeowners association, tell the electrician at the start, because approval may affect the timeline and the plan.Ask us early. Ask the electrician what they need from you before the visit, such as photos of the panel and the parking area.
After the installation passes inspection, the permit is closed and you are ready to charge. Keep the paperwork for your records. If you prefer a particular charger, let the electrician know, and they will tell you whether it suits your panel and parking. Ask what the schedule looks like from the first call to the final inspection, so you can plan the days you need to be home.
Need an EV Charger Installed?
Vortech installs Level 2 home chargers across Phoenix, Glendale, Peoria, Sun City, Sun City West and Surprise. See EV charger installation or read the full guide on this topic.
More questions: Home EV Charger Installation: 12 Most Asked Questions Answered